Terreplenish® can be applied undiluted only in-furrow, pre-plant or post harvest. Here’s how many ounces to use per a quart or gallon for 25-1 and 15-1 (click ASK THE PLANT DOCTOR for different volumes);Suggested dilution is 25 parts clean water to 1 part Terreplenish®. For a quart use: 1.25 oz/ 37 ml For a gallon use: 5 oz/ 148 ml For a 2-gallon sprayer use: 12.5 oz/ 370 ml.
For curative uses such as powdery mildew suggested use is every day at a 15-1 ratio. For a quart use: 2 oz /60 ml For a gallo For a 2-gallon sprayer use: 21.25 oz/ 628 mln use: 8.5 oz/ 251 ml
For Pre Plant Application: Apply 7-10 days ahead of seeding.
For Post Plant Application: Apply after emergence. Applications may be repeated every 7 days or more often if needed. Apply in low sun.
Soil applied Terreplenish® is optimal in fall and will accelerate breakdown of crop residue.
For Greenhouse: best to foliar apply on a weekly or bi-weekly basis to prevent spores.
Terrreplenish can be tank mixed with Seranade, Sonato, Actinovate and other biofertilizer or fungicides. Do not mix with chemical herbicides, fungicides or insecticides. Both oil and soap based adjuvants, stickers and other mixing agents should be avoided. Other biological sources of nutrients and microbes can be mixed, however results may vary depending on mode of action.
2-6 gallons per acre annually are optimal in combination of soil applied, in-furrow, and foliar applications. Terreplenish® is a living bacteria product and may require pre-watering in extremely dry soil conditions or in soil not capable of supporting microbial life. Once established, Terreplenish® has an accumulative effect in soil.
Stored Terreplenish® is useful up to 18 months in normal conditions. The best storage conditions are in a place out of direct sunlight where the temperature stays between 39° to 110° Fahrenheit.Avoid prolonged exposure to oxygen by replacing cap after each use. Keep containers closed after opening. Do not reuse unused product that has been mixed and remained in tank for more then 6 hours. PH of product is 3.4-4.2. This range is a good indicator of viability. No need to pH balance dilution water.